Portable Pressure Calibrator DPI 610
This self-contained, battery powered package contains a pressure generator, fine pressure control, device energizing and output measurement capabilities, as well as facilities for 4-20 mA loop testing and data storage. The rugged design sealed generally to NEMA 12 (IP54) is ergonomically designed such that the pressure pump can be operated and test leads connected without compromising the visibility of the large dual parameter display. The mA step and ramp outputs and built-in continuity tester extend the capabilities to include the commissioning and maintenance of control loops.
Fully documenting version DPI 615
The DPI 615 provides error analysis for field reporting of calibration errors and pass/fail status. In addition, procedures downloaded from a PC automatically configure the PDI 615 to pre-defined calibration and test routines. |
| |
|
Features |
- Ranges vac to 10,000 psi, multi-rangeable
- Accuracy from ± 0.025% Full Scale
- Fully documenting with RS 232
- Generates Pressure and Vacuum
- Dual Readout: Input and output
|
| |
|
Pneumatic Calibrator DPI 610/615PC |
- Pressure/vacuum pump -22 inHg to 300 psi capability
- Volume adjuster Fine pressure adjustment
- Release valve Vent and controlled release
- Pressure port - 1/8 NPT (female)
- Media - Dry, non-corrosive, non-conductive gasses compatible with 316 stainless steel, Hastelloy C276, BUNA-N and nylon
|
| | |
|
Hydraulic Calibrator DPI 610/615HC |
- Priming pump - Feeds from external source
- Shut-off valve - Open for system priming
- Screw press - 0 to 6000 psi capability
- Pressure port - 1/8 NPT (female)
- Media - Demineralized water and most hydraulic oils
|
| | | Electrical Inputs
|
Input |
Range |
Accuracy |
Resolution |
Remarks |
| Voltage* |
±50Vd.c.
(±30Vdc IS version) |
±0.05%Rdg. ±0.004%FS |
100μV max |
Autoranging, >10MW |
| Current* |
±55mA |
±0.05%Rdg. ±0.004%FS |
0.001mA |
10ohm, 50V max. |
| Temperature |
15° to 105°F |
±2°F |
0.2°F |
Local ambient |
| Switch |
Open/Closed |
— |
— |
5mA whetting |
| Electrical Outputs |
| Output |
Range |
Accuracy |
Resolution |
Remarks |
| Voltage |
10Vd.c. |
±0.1% |
— |
Max. load 10mA |
|
24Vd.c. |
±5% |
|
Max. load 26mA |
| Current* |
0 to 24mA |
±0.05%Rdg. ±0.1%F.S. |
0.001mA |
— |
| *Temperature coefficient ±0.004% reading/°F w.r.t. 68°F. |
| Special Features |
| Pressure units |
25 scale units plus one user defined. |
| mA step |
Continuous cycle at 10 sec intervals. |
| Function |
mA Output |
| 4 to 20mA linear |
4 |
8 |
12 |
16 |
20 |
— |
— |
| 0 to 20mA linear |
0 |
5 |
10 |
15 |
20 |
— |
— |
| 4 to 20mA flow |
4 |
5 |
8 |
13 |
20 |
— |
— |
| 0 to 20mA flow |
0 |
1.25 |
5 |
11.25 |
20 |
|
|
| 4 to 20mA valve |
3.8 |
4 |
4.2 |
12 |
19 |
20 |
21 |
| mA ramp |
Continuous cycle with configurable end values and 60 sec travel time. |
| Data log |
Multi-parameter with internal memory for 10,000 values. Variable sample period or log on key press. (615: log on key press for calibration results) |
| Snapshot |
Paperless notepad. Stores up to 20 complete displays. |
| Computer interface |
DPI 615 Bidirectional for downloading procedures and uploading results. |
| Process functions |
Tare, max/min, filter, flow, % span. |
| Language |
English, French, German, Italian, Portuguese and Spanish. |
| Power management |
Auto power OFF, auto backlight OFF, battery low indicator and status on key press. |
| Display |
| Panel |
2.36 x 2.36 inch graphic LCD with backlight. |
| Readout |
± 99999 capability, 2 readings per second. |
| Environmental |
| Operating Temperature |
15° to 120°F |
| Calibrated Temperature |
15° to 105°F |
| Humidity |
0 to 90%, non-condensing. |
| Sealing |
Generally to NEMA 12 (IP54) |
| Conformity |
EN61010, EN50081-1, EN50082-1, CE marked. |
| Physical |
7.7 lb, 11.8 x 6.7 x 5.5 inches |
| Power supply |
6 x 1.5 V 'C' cells, alkaline (up to 65 hours nominal use at 68°F rechargeable battery pack and charger are supplied as standard (20 hours nominal use). |
| CAT NO. |
 |
MODEL |
|
DEscRIPTION |
|
AVAIL |
|
PRICE |
| DR639108 |
|
DPI610PC (0-5 PSIG) |
|
PRESSURE INDICATOR/CALIBRATOR |
|
Yes |
|
5,605,200 |
| Includes pressure/vacuum pump, volume adjuster, vent valve, carrying case, rechargeable battery pack, and charger. Scales in psi, inches H2O and inches Hg. Size 11.8" x 6.7" x 5.5". Weight 6.6 lbs. |
| DR639109 |
|
DPI610PC (0-30 PSIG) |
|
PRESSURE INDICATOR/CALIBRATOR |
|
Yes |
|
5,605,200 |
| Includes pressure/vacuum pump, volume adjuster, vent valve, carrying case, rechargeable battery pack, and charger. Scales in psi, inches H2O and inches Hg. Size 11.8" x 6.7" x 5.5". Weight 6.6 lbs. |
| DR63970 |
|
DPI610PC(0-100 PSIG) |
|
PRESSURE INDICATOR/CALIBRATOR |
|
Yes |
|
5,605,200 |
| Includes pressure/vacuum pump, volume adjuster, vent valve, carrying case, rechargeable battery pack, and charger. Scales in psi, inches H2O and inches Hg. Size 11.8" x 6.7" x 5.5". Weight 6.6 lbs. |
| DR639111 |
|
DPI610PC(0-300 PSIG) |
|
PRESSURE INDICATOR/CALIBRATOR |
|
Yes |
|
5,605,200 |
| Includes pressure/vacuum pump, volume adjuster, vent valve, carrying case, rechargeable battery pack, and charger. Scales in psi, inches H2O and inches Hg. Size 11.8" x 6.7" x 5.5". Weight 6.6 lbs. |
| DR639113 |
|
DPI 610HC |
|
High Pressure Portable Digital Calibrator |
|
Yes |
|
7,884,000 |
| DR639114 |
|
DPI 610LP |
|
Low Pressure Digital Handheld Calibrator Specify Range: +1, +5, +10, +20, +30 and +60 in H2O |
|
Yes |
|
7,981,200
|
| Includes coarse and fine volume adjuster, vent valve, auto zero equalization, carrying case, test leads, 1/8" I.D. hose. A manual pressure/vacuum squeeze pump and 1/8" I.D. hose "T" connector, calibration certificate, user guide, rechargeable batteries and charger. 25 selectable scales as standard. |
| DR639123 |
|
DPI 615PC |
|
Portable Digital Calibrator |
|
Yes |
|
6,912,000 |
| DR639124 |
|
DPI 615HC |
|
High Pressure Calibrator |
|
Yes |
|
9,720,000 |
| DR191022 |
|
191-A022 |
|
Rechargeable battery pack (70Vac) & charger (P/N 191-A023) |
|
Yes |
|
118,800 |
| DR639112 |
|
191-129 |
|
Universal charger |
|
Yes |
|
162,000 |
| DR639115 |
|
DA200-A145 |
|
OPTIONAL Remote pressure sensor, 1 and 2.5 psi gauge FOR Portable Pressure Calibrators |
|
Yes |
|
2,149,200
|
| DR639116 |
|
|
|
OPTIONAL Remote pressure sensor, 5 to 500 psi gauge or absolute FOR Portable Pressure Calibrators |
|
Yes |
|
1,717,200
|
| DR639117 |
|
|
|
OPTIONAL Remote pressure sensor, 1000 to 10,000 psi sg or abs FOR Portable Pressure Calibrators |
|
Yes |
|
2,149,200
|
| DR639118 |
|
DA2200-A148 |
|
OPTIONAL Remote pressure sensor, 1 and 2.5 psi differential FOR Portable Pressure Calibrators |
|
Yes |
|
2,581,200
|
| DR639119 |
|
|
|
OPTIONAL Remote pressure sensor, 5 to 500 psi differential FOR Portable Pressure Calibrators |
|
Yes |
|
2,149,200
|
| DR639120 |
|
LPE 9400 |
|
OPTIONAL Low pressure remote sensor with low pressure hand pump, adapters, hose and carrying case. FOR Portable Pressure Calibrators |
|
Yes |
|
2,581,200
|
| Minimum of one option B2 required per DPI 610/615 when ordering remote sensors. Specify Range: ±1, ±5, ±10, ±20, ±30 and ±60 in H20 |
| DR639121 |
|
(B2) |
|
OPTIONAL Mating cable for remote sensors (P/N IA2405-06-I-VO) FOR Portable Pressure Calibrators |
|
Yes |
|
183,600
|
| DR639122 |
|
(B3) |
|
OPTIONAL Remote pressure sensor (150mV max.) FOR Portable Pressure Calibrators |
|
Yes |
|
302,400
|
| UM831020 |
|
ICDPI |
|
OPTIONAL Intecal-W software - ICDPI FOR Portable Pressure Calibrators |
|
Yes |
|
5,389,200
|
| DR639211 |
|
860-116 |
|
OPTIONAL Spare carrying case 860-116 FOR Portable Pressure Calibrators |
|
Yes |
|
108,000
| | |
