The 1000 series 1/4 Din conductivity and resistivity controllers have more features
The 1000 series 1/4 Din conductivity and resistivity controllers have more features than any other controllers in their price range! Their high +0.5% full-scale accuracy, 1 to 2000 second selectable time delay, and adjustable set point hysteresis bands mean you can trust these controllers for rapid on / off control of your critical processes.
Customize your controller to fit your exact application. Each unit is selectable for conductivity or resistivity control, isolated 0-20 or 4-20 mA recorder output; 70 or 220 VAC; normally activated or unactivated relays; normally open or closed relays; and manual or automatic temperature compensation. The compact 1¼4 DIN size fits into standard panel cutouts. The IP54 rated front panel keypad is weather resistant.
Features
Removable terminal blocks
Splash-resistant, IP64 rated membrane keypad
Mounting hardware for easy panel installation
Large dual display LCD for easy reading -features clear multiple annunciators, set points, and status and error messages
Two set point, two SPDT relay operation -choose from lo/lo, lo/hi, hi/lo or hi/hi control
Time delay adjustment on all relays -select from 1 to 2000 sec to minimize false alarms
Battery backup of memory maintains setup when power fails
Separate alarm relay -alerts you to set points exceeded for a specific length of time or a failed temperature sensor
Separately adjustable high and low set point hysteresis bands -prevent rapid contact switching if your measured value is fluctuating near the set point
Adjustable temperature coefficient -from 0.00 to 10.00% per °C lets you input your solution’s true temperature correction for higher accuracy
Choice of 0.01, 0.1, 1.0 or 10.0 cell constants -for accurate readings in any solution
0-20/4-20 mA transmitter/recorder output — for remote monitoring and hard copy recording
Protected against electromagnetic interference — units that meet CE requirements are available
Push button keypad gives you fast access -to one-point calibration, switchable manual or automatic temperature compensation, and call up to view set points
Two level password protection -first level allows quick access to calibration: second level lets you change set-up parameters
LED indicators signal control activities -monitor controller status from a distance
CAT NO.
MODEL
DEscRIPTION
AVAIL
PRICE
AK9462000
WD-35200-20
CONDUCTIVITY CONTROLLER, 120VAC, 48 TO 62 HZ
Yes
1,188,000
AK9462002
WD-35200-40
RESISTIVITY CONTROLLER, 120VAC, 48 TO 62 HZ
Yes
1,188,000
AK9461017
WD-35100-90
OPTIONAL POWER CORD; 3 FT W/BARE LEADS,70VAC FOR 1/4 DIN Conductivity and Resistivity Controllers
Yes
14,256
AK9462004
WD-35820-20
OPTIONAL CONDUCTIVITY CELL,EPOXY BODY, GRAPHITE ELECTRODES CELL ConSTANT=1.0, 3/4" NPT THREAD FOR 1/4 DIN Conductivity and Resistivity Controllers
Yes
303,480
AK9482005
WD-35820-21
OPTIONAL CONDUCTIVITY CELL, EPOXY BODY CELL ConSTANT= 0.1, 3/4" NPT THREAD FOR 1/4 DIN Conductivity and Resistivity Controllers
Yes
303,480
AK9462006
WD-35820-22
OPTIONAL CONDUCTIVITY CELL, EPOXY BODY CELL ConSTANT= 10, 3/4" NPT THREAD FOR 1/4 DIN Conductivity and Resistivity Controllers
Yes
303,480
AK9462007
WD-35820-25
OPTIONAL CONDUCTIVITY CELL, GLASS BODY, PLATINUM ELECTRODES CELL ConSTANT= 1, 3/4" NPT THREAD FOR 1/4 DIN Conductivity and Resistivity Controllers
Yes
354,888
AK9462008
WD-35820-26
OPTIONAL CONDUCTIVITY CELL, GLASS BODY, PLATINUM ELECTRODES CELL ConTANT= 0.1, 3/4" NPT THREAD FOR 1/4 DIN Conductivity and Resistivity Controllers
Yes
403,056
AK9462009
WD-35820-40
OPTIONAL CONDUCTIVITY CELL CELL ConSTANT=0.01, 3/4" NPT THREAD FOR 1/4 DIN Conductivity and Resistivity Controllers
Yes
415,152
사용후기 리스트
제목
평가
이 상품에 대한 사용후기가 아직 없습니다.
사용후기를 작성해 주시면 다른 분들께 많은 도움이 됩니다.
