(주)코린스

분류 검색

현재위치 : Home > > >

 
이전 큰 이미지 다음

DN521713 Multi-Point Controller

제조사 : DAVIS
제품번호:DN521713
시중가격 : 원
판매가격  : 원
포인트 : 점
수량 :
  PLUS   MINUS   개
■ 회원가입을 하시면 할인된가격을 보실수 있습니다.
■ 모든가격은부가세별도 입니다.
■ 회원이 되시면 가격변동정보, 신제품, 특판제품, 기술정보등 다양한
뉴스정보를 보내드립니다.
■ 30만원미만은 택배비 3,000원(착불)입니다.
■ 카드결재시 세금계산서 발행 불가합니다.
■ 배송은 평균 2~3일정도 예상됩니다.

상세페이지를 마이피플로 보내기 - 웹용 상세페이지를 twitter로 보내기 상세페이지를 facebook으로 보내기 상세페이지를 Me2Day로 보내기

The MPC is a microprocessor based controller specifically designed to monitor the output signals
The MPC is a microprocessor based controller specifically designed to monitor the output signals of the MPT AutoCal remote hazardous gas transmitters (4-20 MA loop). The MPC controller will monitor up to eight transmitters for any combination of gases for which transmitters are available.

The 8 channel MPC is designed to be cost effective with as few as two channels in use. The menu driven set-up procedure allows technicians with no previous experience to initialize the system easily. Additional channels can be added by simply entering the set-up mode and specifying the type of gas detected by the additional transmitters.

AutoCal Transmitters

MPT AutoCal transmitters are intended for installation requiring the continuous monitoring of ambient atmospheres or confined spaces where personnel might be exposed to toxic, combustible, oxygen depleted or enriched atmosphere.

The MPT AutoCal transmitters output 4-20mA signals compatible with most controller systems and SCADA systems regardless or manufacturer.

Transmitters are currently available for CO, O2, H2S, CH4, NO2, SO2, & CL2. Models for HCN, HCL and NH3 are scheduled for introduction. Consult for specifications.

The intrinsically safe MPT AutoCal transmitters are easily calibrated or zeroed by one technician. Simply attach the cal connector and flow gas. Remove the cal connector when the green light on the transmitter relights indicating the instrument is functioning properly.

MPC Controller Features

DISPLAY: The large, high quality (4 x 16 character) LCD can be set to read one transmitter or to scan through all transmitters simultaneously. If an alarm occurs while in the SCAN mode the unit will display only the channel(s) registering an alarm condition

• ALARMS: Two levels of alarm (warn and danger) are offered with the choice of latching or non latching alarm relays. When in the the latched mode an alarm relay would remain activated until acknowledged, even though gas levels has fallen below the alarm point. A built console alarm is included and remote location horns are optional

• SYSTEM INTEGRATION: The MPC controller offers great reliability and ease of use as a stand alone system or integrated into larger plant wide controllers or SCADA systems. The RS232 port allows communication with any remote computer or controller. Custom software is required

• SYSTEM OUTPUTS: The MPC is equipped with three internal relays. These are for system fault, warn and danger. An optional 16 relay accessory panel may be specified to provide separate alarms (warn & danger) for each of the eight channels

• ENCLOSURES: The wall mounted Nema 4X enclosure is water, oil, dust and chemical resistant and designed for rugged applications

 
 
 
CAT NO. MODEL DEscRIPTION AVAIL PRICE 
DN521713   MPC   MULTI-POINT CONTROLLER   Yes   3,229,200
DN521714   MPT1   O2 TRANSMITTER   Yes   1,620,000
DN521715   MPT3   H2S TRANSMITTER   Yes   1,706,400
DN521716   MPT4   CO TRANSMITTER   Yes   1,706,400
DN521717   MPT5   CH4 TRANSMITTER   Yes   1,706,400
DN521718   MPT6   NO2 TRANSMITTER   Yes   2,052,000
DN521719   MPT7   SO2 TRANSMITTER   Yes   2,052,000
DN521720   MPT8   CL2 TRANSMITTER   Yes   2,052,000
DN521721   6001-018   OPTIONAL ADDITIONAL CABLE UP TO 2000 FT(PER FOOT CHARGE) 6001-018 FOR Multi-Point Gas Monitor / Controller   Yes   Call 031-777-1588

 

DN521722   HEATED SENSORS   OPTIONAL HEATED SENSOR OPTION (FOR TEMPBELOW 36F) **SEE NOTES** FOR Multi-Point Gas Monitor / Controller   Yes   Call 031-777-1588