The Series 6 & Series 7 are fully compliant Category 6/ ISO E and Category 7/ISO F
The Series 6 & Series 7 are fully compliant Category 6/ ISO E and Category 7/ISO F with frequency ranges up to 350Mhz and 750Mhz respectively. Full graphical autotests are performed as quickly as 25 seconds for 250Mhz and 35 seconds at 600Mhz cable. Both units utilize an advanced link adapter method to reduce cost of ownership. The Series 6 & Series 7 are both packaged with Category 6/ISO E channel adapters and the Series 7 also includes two Category 7/ISO F channel adapters. These channel adapters fit into the case of the unit and are locked into place. This creates a stable and repeatable testing platform while eliminating bulky adapters extending beyond the end of the units. By simply plugging in the appropriate patch cord to the channel adapter you can now perform permanent link testing. Should the plug on the patch cord ever wear out you can simply purchase a new patch cord rather than the entire assembly greatly reducing the lifetime cost of ownership. Available accessories include the industry’s most advanced fiber options, FIBERTEC and TEACETEK. FIBERTEK enables loss, length, bi-directional testing over two fibers, and talkset over fiber capabilities for 850 and 1300 nm Multimode and 1310 and 1550 nm Singlemode fiber. TRACETEK is the first fiber accessory for a copper tester that will trace a fiber run, locate distance to events along the fiber, and measure the magnitude of the event. This capability can eliminate the need for a more costly OTDR in campus network environments.
Series 6P & Series 7P Premium kits include all of the components of the "B" kit plus: – Hard carrying case replaces soft case – PCMCIA adapter – 32MB compact flash – USB port flash reader for PC – 2 extra batteries for a total of 4 – External dual bay battery charger
Features
Series 6 is fully compliant with Category 6/ISO E draft standards and tests with graphs in approximately 25 seconds
Series 7 is fully compliant with emerging Category 7/ISO F standards with a frequency range up to 750 Mhz and graphical tests in 35 seconds
Both Series 6B & Series 7B share the following:
1/4 VGA color screen on main unit and two-line LCD on remote unit
Serial and USB ports for uploading tests and upgrading firmware
Two full-function PCMCIA slots accept compact flash memory and provide for future capabilities
Soft carrying case
LANTEK reporter software
USB and Serial cables
Two talksets and two AC adapters
User manual
2 Category 6 channel adapters and patch cords with Series 6
2 Category 6 and 2 Category 7 channel adapters and patch cords with Series 7
SPECIFICATIONS
Internal memory
No graphs approximately 6,000 tests
With graphs approximately 100 tests
External memory 32MB compact flash
No graphs approximately 24,000 tests
With graphs approximately 400 tests
External memory 256MB compact flash
No graphs approximately 192,000 tests
With graphs approximately 3,200 tests
Standard test compliance
ANSI/TIA/EIA 568B, Category 6 (draft), ISO C/D and ISO E/F (draft), AS/NZS 3080, IEEE 802.3 Ethernet, EN50173, EN50173A1
Cable types
UTP/ScTP/FTP CAT 3/5e/6/7 (Series 7 only); ISO C/D/E/F (Channel, Basic, and Permanent Link) IBM STP Type 1,2,6,Coax
Dimensions
10.1" x 5.0" x 2.3" Display and remote
Weight
2.3 lb. Display
2.0 lb. Remote
1.2 lb Battery
Battery Packs
NiMH rechargeable
Typical operating life (battery)
8 hrs
Max. Operating Temp.
0°C-50°C degrees
Max Storage Temp.
-20°C to +70°C degrees
Humidity
5-90% noncondensing
Series 6/7
Range
Resolution
Accuracy
Length (50-100Ω cable)
0-2000ft
1ft
±(3% + 3ft)
Delay
0-8000 ns
1ns
±(3% + 1ns)
Average Impedance
35-180Ω
0.1Ω
±(3% + 1Ω)
Capacitance (bulk)
0-100 nF
1pF or 3 dig
±(2% + 20 pF)
Capacitance
0-100 pF/ft.
0.1 pF
±(2% + 20 pF)
DC Loop Resistance
0-200Ω
0.1Ω
±(1% + 2Ω)
Attenuation
1-350 or 750** MHZ
0.1 db
Level III*
NEXT
1-350 or 750** MHZ
0.1 db
Level III*
Return Loss
1-350 or 750** MHZ
0.1 db
Level III*
ELFEXT
1-350 or 750** MHZ
0.1 db
Level III*
Noise Floor
<-90 dB
Dynamic Range
>90 dB
*Level III only specified to 250 MHz ** Series 7 only
CAT NO.
MODEL
DEscRIPTION
AVAIL
PRICE
ID761
LANTEK 6B
Basic Version Cable Certification Tester
Yes
12,949,200
Call for pricing on Tracetek and Fibertek options
ID762
LANTEK 6P
Premium Version Cable Certification Tester
Yes
15,109,200
Call for pricing on Tracetek and Fibertek options
ID771
LANTEK 7B
Basic Version Cable Certification Tester
Yes
15,109,200
Call for pricing on Tracetek and Fibertek options
ID772
LANTEK 7P
Premium Version Cable Certification Tester
Yes
17,269,200
Call for pricing on Tracetek and Fibertek options
사용후기 리스트
제목
평가
이 상품에 대한 사용후기가 아직 없습니다.
사용후기를 작성해 주시면 다른 분들께 많은 도움이 됩니다.
