The Megger® SCT500 Premise Wiring Tester identifies all common wiring faults, including split pairs
The Megger® SCT500 Premise Wiring Tester identifies all common wiring faults, including split pairs; opens and shorts, on both screened (STP) and unscreened (UTP) cabling. Tests are performed in accordance with TIA568A/B, ISO11801, EN50173 and USOC standards. In addition to this, the SCT500 has a built in TDR facility for measuring cable or link length, and, in conjunction with 16 available remote units, can identify various network circuits.
Features
Shorts, opens, pair reversal, mis-wires
Measures cable length
Works with up to 16 remotes (comes complete with 1 remote)
Built in tone generator for tracing
STP and UTP (shielded and unshielded)
Dual standard (568A and USOC)
LCD display
Performs every test required apart from performance testing (performance testing requires very expensive instrumentation)
Identifies/locates circuits
Measures cable length
Also test patch leads
3 Year Warranty
SPECIFICATIONS
The following cable and wiring standards are supported by the MG8448
UTP TIA568A/B; STP TIA568A/B; UTP USOC; STP USOC
The following fault states are identified and indicated on the MG8448 display
Open Pin x (y) (z)
Open circuit connection at the indicated pin(s)
Short Pin x y
Short circuit between the indicated pins
Crossed Wires Pin x y
The indicated wires have been reversed
Split Pair x y
The two wires indicated are not paired correctly
Multiple Fault Pins w x y z
There are several faults existing
Short Pin x Scr
The indicated pin is shorted to the screen (STP only)
Open Screen
The cable screen is open circuit (STP only)
Missing Remote Unit
No remote unit was detected at the far end on th cable
Correct wiring or wire map leads to the following indication on the MG8448 display
PASS I/D xx
Test has passed with remote identifier xx at the far end; 16 unique remote identifiers are available
The following functions/screen displays also exist within the MG8448
Length xx.xm
The cable being tested is xx.xm long
Range
6 ft - 360 ft; Accuracy 6 ft - 30 ft (±1.5 ft); 30 ft - 360 ft (±5%)
Warble Mode
The tester will output a warble tone for cable tracing
Frequency alternation
810Hz and 170Hz
Rate of alternation
6 times per second
Low Battery
The instrument battery needs replacement
CAT NO.
MODEL
DEscRIPTION
AVAIL
PRICE
MG8448
SCT500
Advanced Premise/Structured Cabling Tester
Yes
745,200
사용후기 리스트
제목
평가
이 상품에 대한 사용후기가 아직 없습니다.
사용후기를 작성해 주시면 다른 분들께 많은 도움이 됩니다.
