The award-winning NEWPORT® I™Server is the simplest, easiest, most economical way
The award-winning NEWPORT® I™Server is the simplest, easiest, most economical way to connect serial devices to an Ethernet network and the Internet. Getting started with the iServer is very simple and easy because it can take a dynamically assigned IP address from a DHCP server on your network. This DHCP client capability is a valuable and unique feature of the NEWPORT iServer that makes it extremely easy and simple to start using this device on almost any Ethernet network. You can easily assign a static IP address to the iServer instead of a dynamic one, if necessary. The IP address can be assigned locally through its serial connection, as well as remotely over an Ethernet network via Telnet or a web browser, using its factory default IP address. The NEWPORT iServer connects to an Ethernet Network with a standard RJ45 connector. Serial devices connect to screw terminals on removable connectors. You can select RS-232, or RS-485 (and RS-422) Serial Communications from the configuration Web page. The iServer can be used to make an existing Serial device a "node" on an Ethernet network with a unique IP address that's accessible from any authorized computer on the LAN, WAN, or Internet. The iServer can instead be used to create a virtual tunnel on an Ethernet/Internet network simulating a local point-to-point serial connection between a serial device and a PC. This replaces dedicated point-to-point wiring limited to 50 feet on an RS-232 connection. The NEWPORT iServer packages the Serial data in standard TCP/IP packets that can travel anywhere on the Ethernet LAN or over the Internet. The NEWPORT iServer is compatible with almost any device with a Serial interface such as: time clocks, security alarms, card-key access controllers, telecommunications equipment, vending machines, bar code readers, electric power meters, UPS systems, test & measurement instrumentation, PLC’s, serial printers, cash registers, and many more. You do not need to rewrite the firmware for your serial devices to work with the iServer, and in some cases might not need to change your application software. Your serial devices will function over the Ethernet network or the Internet as if they were connected directly to a PC. The COM port on the iServer simulates a local COM port on the PC. The NEWPORT iServer is compatible with wireless Ethernet. In settings where wires of any kind are not possible, the NP3013 can be connected to a Wireless Ethernet Access Point enabling simple, economical Wireless connectivity of Serial Devices.
Features
Connect almost any Serial Device to an Ethernet network and the Internet
Replace dedicated wiring and PC’s for serial connections
Handles RS-232, RS-422 and RS-485 Serial Communications
Digital input/output lines
Well-developed TCP/IP Stack
Web based interface for easy configuration and access without any special software
Configuration option via Telnet and Serial
DHCP and DNS support for dynamic IP address assignment
Password protection for Security
Snaps easily into DIN Rail mounting rack
Firmware upgradeable
SPECIFICATIONS
Serial Interface
Interface
Software Selectable RS-232, RS-422 or RS-485 (2 wire)
Connector
screw terminal plugs (EIS-2) RJ45 (EIS-2-RJ)
Data Rates
300 to 115.2 Kbps
Characters
7 or 8 data bits
Parity
odd, even, or none
Stop Bits Flow Control
Digital I/O's
1 or 2 Hardware (RTS/CTS) and Software (Xon/Xoff). The hardware flow control is available only with the EIS-2-RJ model 4 digital input/output lines
Network Interface
Interface
Ethernet 10Base-T
Connector
RJ45
Protocols
TCP/IP, ARP, ICMP, DHCP, DNS, HTTP, and Telnet
Indicators (LED's)
Network Activity, Network Link, and Serial Transmit/Receive
Processor
CPU
Enhanced 8051, 22 MHz
Memory
512 Kbyte Flash, 16 Kbyte SRAM
Management
Embedded Web server, Telnet login, Serial login
Embedded Web Server
Serves dynamic Web pages and Java applets (256 Kbyte capacity)
Power Input - DIN Rail Enclosure (DC Power supply sold separately)
Input:
10-32 Vdc
Consumption
2 W max.
Environmental
Operating Temperature
0 to 70° (32 to 158°F)
Storage Temperature
-40 to 125°C (-40 to 257°F)
Material
Polycarbonate case with DIN Rail mount
Dimensions
90.2H x 25.1W x 115.0D mm (3.54 x .99 x 4.53 in)
Weight
113 kg (0.25 lbs.)
Agency Approvals
FCC-B, C/UL, CE
CAT NO.
MODEL
DEscRIPTION
AVAIL
PRICE
NP30013
EIS-2
iServer Industrial MicroServer™ with screw termianl serial port
Yes
421,200
NP30014
EIS-2-RJ
iServer Industrial MicroServer™ with RJ45 serial port
Yes
421,200
NP30015
IBRN-PS-1000
Power Supply (switching) 95 to 240 Vac input, 24 Vdc output @ 850mA (power up to 7 units)
Yes
324,000
사용후기 리스트
제목
평가
이 상품에 대한 사용후기가 아직 없습니다.
사용후기를 작성해 주시면 다른 분들께 많은 도움이 됩니다.
