The CUB5 provides up to three functions in a single display package (rate indicator and two counters).
The CUB5 provides up to three functions in a single display package (rate indicator and two counters). The display can be toggled either manually or automatically between the rate and counter(s) display.
The CUB5 display has 0.46" (11.7 mm) high digits. The counters may be programmed for one of eight different count modes. The counters and rate indicator have separate scaling and decimal point placement for read-outs in different engineering units.
Input A accepts a signal for the Count and Rate displays. Input B accepts a signal for the Count display or direction control. In the anti-coincidence mode, both inputs are monitored simultaneously so that no counts are lost. The final count can be chosen as the sum or difference of the two inputs. The Rate Indicator has programmable low (minimum) and high (maximum) update times to provide optimal display response at any input frequency. There is a programmable user input that can be set for one of a variety of functions.
The unit is housed in a lightweight, high-impact plastic case with a clear viewing window. The sealed front panel meets NEMA 4X/IP65 specifications for wash-down and/or dusty environments, when properly installed. The CUB5 can be powered from an optional RLC Micro Line/Sensor Power Supply (MLPS0000) attached directly to the rear of a CUB5. The MLPS0000 is powered from either a 115 or 230 VAC source.
Features
LCD positive reflective or negative transmissive with yellow/green or red LED backlighting
0.46 inch (11.7 mm) high digits
Programmable decimal point
Front panel and remote reset
Count speeds up to 20 KHz (High Speed Input)
Operates from 9 to 28 VDC power source
Programmable prescaler for totaling
Bi-directional counting, up/down control
Quadrature sensing (Up to 4 Times Resolution)
Anti-coincidence counting (add/add & add/sub)
Separate count and rate input mode
Wire connections made via screw clamp type terminals
