VIPMEM is a non volatile flash memory module in a 6 modules DIN case. It is equipped with a 230 / 115 VAC power supply and it is able to store data from a VIPNET 485 monitoring network connected to a serial port RS485. In a second time, it can download stored data to a PC having VIP MEM configuration and downloading software installed and connected either to its serial port RS232 or internal modem. Five digital optical coupled inputs enable the counting and the storing of state of maximum five external relay contacts / npn open collector pulsed outputs.
GENERAL SPECIFICATIONS
• Case: self-estinguish plastic material • Dimensions: 6 modules standards DIN 43 880 (106 mm. X 90 mm. X 73mm.) • Installation: OMEGA DIN rail (DIN 46277 EN 50022) • Display (in models D and DM only): 2 lines, 16 columns, backlit LCD display (as DEM3 / DM3 / DMD3). • Pushbuttons (in models D and DM only): PAG, SEL, SET • Power supply: 230 Vrms/115 Vrms 10% @ 50/60 Hz (5VA). • Communication port: 1 RS232 serial port with 3 wires terminal block (GND, RX, TX) 1 RS485 optoinsulated serial port with 2 wires terminal block (A, B); 1 Modem port (if equipped, shared with RS232 serial output) with two wires terminal block (RING, TIP). • Internal memory: from 2 Megabytes up to 8 Megabyte, parallel bus, storing also VIP MEM setup data. Saving all the measures, 2 Megabytes memory enables to save data with: 1 instrument read any 10' ---> 3 months 3 instruments read any 10' ---> 1 month 30 instruments read any 10' ---> 3 days Saving only kWh, kvarh, kW: 1 instrument read any 10' ---> 20 months 3 instruments read any 10' ---> 7 months 30 instruments read any 10' ---> 20 days Saving only kWh: 1 instrument read any 10' ---> 30 months 3 instruments read any 10' ---> 10 month 30 instruments read any 10' ---> 1 month • Max. no. of devices connectable to RS485: max 32 instruments Vip Energy 485, Vip One 485, Vip96 Plus 485, DET3, DMD3 485. • Internal modem (in models M and DM): with baud rate fixed at 2400 baud. • Built-in Calendar-Clock: you can select (via PC with a setup program) the automatic data record in the internal memory at regular intervals selectable from 2 seconds up to 24 hours by VIP MEM configuration and downloading PC software. • Digital inputs: 5 optical coupled digital inputs max 24 VDC + 10%, 60 mA, for external relay contacts or npn open collector outputs. • CE Conformity declaration: the VIP MEM family of products conforms to Directive 89/336/EEC (EMC) and 73/23/EEC - 93/68/EEC (LVD). • Standards: in compliance with standards IEC1010-1 250V Class III, protection degree 2, according to IEC 664-664A (Safety) EN500081-1, EN500082-2 and EN500022 (EMC Electromagnetic Compatibility) • Operating temperature: from 0°C to 50°C • Relative Humidity Range (R.H.): from 20% to 80% • Condensation: non condensing • Weight: 0,6 Kg. • Protection Level: instrument IP20, front panel IP40 • PC Software: VIP MEM Windows 9x / NT 4.0. configuration and downloading of stored data software.
MODELS AVAILABLE
VIP MEM 2: 2 megabyte flash memory, no lcd Display, no Modem VIP MEM 8: 8 megabyte flash memory, no lcd Display, no Modem VIP MEM D2: 2 megabyte flash memory, with lcd Display, no Modem VIP MEM D8: 8 megabyte flash memory, with lcd Display, no Modem VIP MEM M2: 2 megabyte flash memory, with Modem, no lcd Display VIP MEM M8: 8 megabyte flash memory, with Modem, no lcd Display VIP MEM DM2: 2 megabyte flash memory, with lcd Display and with Modem VIP MEM DM8: 8 megabyte flash memory, with lcd Display and with Modem
사용후기 리스트
제목
평가
이 상품에 대한 사용후기가 아직 없습니다.
사용후기를 작성해 주시면 다른 분들께 많은 도움이 됩니다.
