The only Capture Hood Kit for Air Balancing you will ever need
A highly specified, light weight, one man operated solution for commissioning and balancing air volume flow at grilles, linear slots and diffusers. Accurate for both supply and extract ProHood saves time and money on HVAC commissioning while helping create an energy efficient and healthier environment. With an incredible choice of SIX Fabric and THREE Plastic Hood sizes and a detachable anemometer look no further than ProHood.
THE PROHOOD ADVANTAGE
Displays air Volume flow, Velocity and Temperature in SI, Metric or Imperial measurements
No mistakes with colour coded fabric hoods for easy identification
Free calibration certificate to international standards
Hoods designed to comply with latest European grille size recommendations
Easy read, tilting, backlit meter indicates supply or extract flow
Use in any orientation for wall, ceiling and floor grilles
ATD value input automatically adjusts for grille correction factors
Highly accurate - even at low flows - no plate changes required
Detachable air flow meter for every day use with a choice of vane 35mm and 100mm diameter sensors
Pre-assembled hood frames save time on site (unlike metal kits)
Auto zero, memory, avg/max/min/sum, STP, RS232 for Windows®
So compact basic kit fits in a 'carry aboard' flight bag
Perfect for commissioning, facilities managers, health and safety specialists, test engineers, ventilation contractors and consultants
A MASTERPIECE OF FUNCTIONALITY AND EASE OF USE FOR FAST, ACCURATE, AIR BALANCING
Choice of six durable, collapsible fabric hood sizes
Option of three plastic hoods for smaller grilles
Three fixed opposed handles for ease of handling with finger tip control button
Detachable anemometer with 100mm and 35mm vane sensors and articulating telescopic probe
Superbly featured air meter with 'real time' and 'recall modes', duct dimensions and area inputs
Adjustable display damping for fluctuating flows
Temperature measurement direct from hood and vane sensor
No low flow screens to remove and replace Leak tight, tear resistant, nylon hoods with air cushioned grille seals
Hoods interchangeable with other leading makes
Tilting, back-lit flow meter fully protected for on-site knocks
True ambient readout or STP corrected readings
Direct download into Windows® software or to portable mini printer
Calibration certificate, carry case and batteries supplied
Exceptional value for money.
SPECIFICATIONS
Volume Flow
85 to 4078 m3/hr 24 to 1133 L/sec 50 to 2400 CFM
Velocity Range (using 100mm vane)
0.25 to 30 m/sec 50 to 6000 ft/min
Temperature Range
0 to 800C 320 to 1760F
ATD Factor Input
0.1 to 9.0
Accuracy (calibrated better than)
Supply ± 3% of reading ± 12 m3/hr Exhaust ± 4% of reading ± 12 m3/hr
Display Resolution Volume
1 m3/hr 1 1/sec 1 CFM
Velocity
0.01 m/sec 1 ft/min
Temperature
0.010C 10F
Memory Locations
99
Digital Output
RS232
Operating Range
0 to 500C
Weight (Instrument and 610x634mm Hood)
3.8kg (8.3lbs)
Compliance
CE, EMC 89/336/EEC EN50081-1, EN50082-1
Standard Kit
Instrument, Meter Hood 610 x 634mm Carry Case Batteries and Certificate of Calibration traceable to International Standards.
Optional
Fabric Hood 410 x 434mm (Red) Fabric Hood 310 x 1234mm (Yellow) Fabric Hood 310 x 1534mm (Orange) Fabric Hood 610 x 1234mm (Blue) Fabric Hood 910 x 934mm (Grey) Plastic Hood* 180mm Dia Plastic Hood* 285 x 235mm Plastic Hood* 330 x 330mm *Use with 100mm vane sensor 100mm Vane Sensor 35mm Vane Sensor Telescopic Vane Extension Probe 0.4 to 1.1m Apu 10 mini Printer Various PC cables for direct interface/download with Windows® Software
사용후기 리스트
제목
평가
이 상품에 대한 사용후기가 아직 없습니다.
사용후기를 작성해 주시면 다른 분들께 많은 도움이 됩니다.
