현재위치 : Home > > >





이전	큰 이미지	다음

DV84120 Liquid Level Switch **

제조사

DAVIS

제품번호

DV84120

판매가격

원

포인트

점

수량

개

■ 회원가입을 하시면 할인된가격을 보실수 있습니다.
■ 모든가격은부가세별도 입니다.
■ 회원이 되시면 가격변동정보, 신제품, 특판제품, 기술정보등 다양한
뉴스정보를 보내드립니다.
■ 30만원미만은 택배비 3,000원(착불)입니다.
■ 카드결재시 세금계산서 발행 불가합니다.
■ 배송은 평균 2~3일정도 예상됩니다.

The sensor is a magnetostrictive device consisting of a diaphragm,nickel tube,magnet,drive coil and pickup coil.

The sensor is a magnetostrictive device consisting of a diaphragm, nickel tube, magnet, drive coil and pickup coil.

If the diaphragm of the sensor is exposed to a liquid material, which offers greater mechanical resistance to the motion of the diaphragm, the transfer of energy to the pickup coil decreases. This results in a decrease in the signal feedback into the amplifier and a corresponding decrease in the signal available from the output of the amplifier.The decreased signal triggers a voltage sensitive network that controls the output relay.

A unique AUTO TEST self-checking circuit constantly verifies the integrity of the sensor circuits. The RED LED is illuminated when the product is absent at the sensor and the system is oscillating at approximately 40 kHz. If the amplitude or the frequency of the sensor circuits changes, the RED LED will go out. If the change of state occurs due to a level change, the relay will follow and change its state. However, if the change of state is due to a sensor failure or some other component failure, the relay will immediately transfer to the alarm condition. This foolproof feature protects the system for loss of power, major component failure or damaged sensor conditions.

Typical Uses

High Level Alarm or Control
Pump Control or Inlet Starvation Alarm
Flow/No Flow Indication
Low Level Alarm or Control

Function

Single Point Switch for On-Off Control of Liquids

Primary Areas of Application

Standard sensor is 347 SS Optional models are available in Carpenter 20, Hastelloy C or 316 SS
The SONAC®/120 is a reliable level control that will sense almost any liquid. Its failsafe features insure positive level control in critical processes. The non-intrusive features of its sensor permit its installation in extremely small vessels and pipes
Non-dedicated vessels-liquids
The device senses virtually any liquid and does not need adjustment when the density or dielectric constants are changed High temperature, high pressure service
The welded, all stainless steel sensor body is designed for service at temperatures to 4000°F (205°C) and pressures to 2000 psig Fluids with foam blankets
The control ignores foam to indicate the true liquid level Cryogenic fluids
Series 26 sensors are designed for service at fluid temperatures to -425°F (-255°C) Please inquire Precision level control requirements
Repeatability to 0.050 in. standard - Corrosion resistant sensors

CAT NO.

MODEL

DEscRIPTION

AVAIL

PRICE

DV84120

120-S

LIQUID LEVEL SWITCH ** W/NEMA 4X HOUSING

Yes

1,285,200