These Ethernet-enabled data acquisition and control modules, feature I/O, data acquisition
These Ethernet-enabled data acquisition and control modules, feature I/O, data acquisition and networking in one module to build a cost-effective, distributed, monitoring, and control solutions for a wide variety of industries and applications. Through standard Ethernet networking, the module retrieves I/O values from sensors and publishes these real-time values to networked nodes on the local area network, intranet, or Internet.
With Ethernet-enabled technology, the modules make up a cost-effective distributed data acquisition and control system for building automation, environmental monitoring, facility management and e-manufacturing applications.
Features
Ethernet-based smart I/O
Mixed Analog and Digital I/O in a single module
Built-In HTTP server and web page in each module for Data Monitoring
Active Alarm/Event handling
Industrial Modbus/TCP Protocol
Remote F/W upgrade thru Internet
Pre-built smart functions
Applications
Environmental Monitoring
Facility Management
Building Automation
Machine Automation
Factory Automation
SPECIFICATIONS
10/100 BaseT Ethernet Network
Based on the highest speed industrial network available
Analog Input Modules
Use microprocessor-controlled, high-resolution, 16-bit, sigma-delta A/D converters to acquire sensor signals such as voltage, current, thermocouple or RTD.
Programmable Alarm Output
Analog input modules include high and low alarm signal with remotely configurable limit values..
Independent Channel Input Type Configuration
Either PT-100, Pt-1000 or Balco mA for each channel
Eight-channel 16-bit Analog Input Modules
Digital Input and Output Modules
Twelve isolated digital input channels and six isolated digital output channels.
Digital Input Channels ProvideThree Operation Modes
Normal Digital Input with inverter setting, 1KHz counter with digital filter, Hi-to-Lo, Lo-to-Hi Latch
Digital Output Channels Provide Three Operation Modes
Normal Digital Output, Pulse output with continuous or burst count mode, Hi-to-Lo, Lo-to-Hi Delay
Counter/Frequency
AN6051
Two 32-bit counter channels and a built-in programmable timer for frequency measurement.
Programmable Alarm Output
AN6051 Modules
Include two digital output channels for alarm functions. You can set alarm values (32-bit) into the module from your host computer.
Relay Output Modules offer six isolated digital input channels and six isolated relay channels
Ethernet Hub/Switch/Fiber Optic
10 Mbps hub, with four twisted pair ports; a 5-port 10/100 Mbps switch; one fiber optic and four RJ-45 ports.
Power Input Range
+10 ~ 30 V DC
Surge Protection
3000 V DC
Operating Temperature
-10 ~ 70° C
CAT NO.
MODEL
DEscRIPTION
AVAIL
PRICE
AN6017
ADAM-6017
8-channel Analog Input w/DO Module
Yes
810,000
AN6050
ADAM-6050
18-channel Isolated Digital I/O Module
Yes
421,200
AN6051
ADAM-6051
16-channel Isolated DI/O w/Counter Module
Yes
421,200
AN6060
ADAM-6060
6-Channel Relay Output w/DI Module
Yes
421,200
AN6510
ADAM-6510
4-port Industrial 10Mbps Ethernet hub
Yes
205,200
AN6520
ADAM-6520
5-port Industrial 10/100Mbps Ethernet Switch
Yes
378,000
AN6700
ADAM-6700
5-port Industrial 10/100M Ethernet Switch w/Fiber
Yes
639,360
사용후기 리스트
제목
평가
이 상품에 대한 사용후기가 아직 없습니다.
사용후기를 작성해 주시면 다른 분들께 많은 도움이 됩니다.