The CON-TROL-CURE® Double Diaphragm 1/2" Pump is recommended for inks
DOUBLE DIAPHRAGM 1/2”
PUMP
The CON-TROL-CURE® Double Diaphragm 1/2" Pump is recommended for inks
and coatings with viscosities too high for Transfer Pumps, or when greater
flow rates are required. This air-driven double diaphragm pump can run dry,
is self-priming, and has variable flow from 0-13 GPM. It has a net weight
of 7.2 lbs, with a maximum operating pressure of 100 PSI. It has a maximum
dry suction lift of 10 ft. It needs no electricity or pressure relief valve.
Inlet and outlet have 1/2" connections.
The pump can operate in 3 ways: fluid flow
back-up, dual fluid, or mixing 2 fluids. Wetted parts are compatible with
UV inks, coatings and cleaning solvents. The pulsating of a diaphragm pump
can be stopped using the CON-TROL CURE® Surge Suppressor, located in our
pump accessories section. 3 kits are also available for the Double Diaphragm
1/2" Pump.
1/2" Double Diaphragm Drum Pump Kit. Convert your Double Diaphragm
1/2" Pump into a drum pump with this kit. The kit consists of 1/2"
polypropylene suction tube and a 1/2" bung adapter that fits on standard
55 gallon drums. The 5 ft suction tube attaches easily to the 1/2"
Pump and slides directly into the bung adaptor. There is no need to unscrew
the pump from the drum to reinstall into the drum. Also, the air line and
discharge tubing do not need to be disconnected.
Air Section Service Kit. This repair kit contains numerous parts with which
to repair the air valve components of the Double Diaphragm 1/2" Pump.
Fluid Section Service Kit. This repair kit contains parts necessary to service
the wetted components of the Double Diaphragm 1/2" Pump.
Part Number
Description
Units
J004-003
DOUBLE DIAPHRAGM PUMP 1/2" (PUMP ONLY)
EACH
J004-044
DOUBLE DIAPHRAGM PUMP 1/2" KIT
EACH
J004-115
AIR SECTION SERVICE KIT
EACH
J004-116
FLUID SECTION SERVICE KIT
EACH
사용후기 리스트
제목
평가
이 상품에 대한 사용후기가 아직 없습니다.
사용후기를 작성해 주시면 다른 분들께 많은 도움이 됩니다.
