Totalizing Counter
The KAL-DIN is a small, lithium battery powered, totalizing counter that is panel mounted. The counter is designed to replace standard electro-mechanical counters. It uses the latest custom CMOS technology and incorporates an 8 digit, 0.276" high, LCD display.
The KAL-DIN operates from a long life lithium battery (life 10 years) and can be operated from contact closure or high speed electronic devices. No separate alkaline batteries are required. The front reset button can be disabled if desired.
Connections are via .025" (6.35 mm) square posts. Push on connector with 9" (229 mm) leads are supplied with unit. When installed, with the gasket provided, the unit meets NEMA 4X/IP65 ratings from the front.
Use the KAL-DAC/DC adapter to pulse from 5 to 240 volts AC or DC.
Use the KAL-DTB adapter for screw terminals.
Connections are via 0.25 inch square posts (push on connector with 9 inch leads supplied with unit).
The KAL-DIN can be pulsed from 5 to 240 Volts AC or DC with the KAL-DIN adapter module which has screw terminals.
When installed, with the gasket provided, the unit meets NEMA 4 rating from the front.
Multi-Resolution Hour Meter
The KAL-DTIME1 and KAL-DTIME2 are 8 year, lithium battery powered, elapsed timers with the following resolutions: minutes and seconds (KAL-DTIME1) or, hours and minutes, or hours and 1/100ths (KAL-DTIME2). The front panel meets NEMA 4X/IP65 standards. The display has 8 large digits each 0.276" high. | 
현재위치 : 
