상품 상세보기 : 판넬형 전력분석기 Panel Energly Analyzer - STAR3 HARMONICS 판넬형 전력 및 하모닉스 측정기

STAR3

STAR 3

The latest instrument available from Elcontrol Energy Net.

This high quality 96*96 panel energy analyser provides brilliant features at a price
never reached before.

The new bright red LCD display, the harmonic analysis , the wide set of measured parameters including the THD available in all the models, the multi-protocol capability of the RS485 port and the high accuracy class 0.5%, the 3 years-warranty period, allow to consider the STAR3 the new state of art of the panel analysers market.

It is a perfect, professional and low cost solution for the electrical panels,
sub-metering systems, OEM applications, supervisory systems, Building and Factory automation systems.

The high flexibility of the instrument makes it adaptable to totally different applications.

The model with harmonics allows a permanent based control of one of the most important aspect of the power supply quality.
Such important possibility, up to now, was reserved only to high-cost device.
The STAR3 breaks this price barrier bringing, for the first time, the harmonic analysis into the market of the panel analysers

MAIN FEATURES

- Digital Energy and Harmonics Analyzer 96*96

- True RMS measures

- Displays 52 measures and 352 measures for model with harmonics

- unbalanced three phase systems delta or star, bi-phase, single phase

- High accuracy : Voltage, Current and Power error <0.5%

- Bright back-lighted red numbers on dark background LCD display.
It is visible in any lighting conditions also from long distance

- Cogeneration Counters

- Total harmonic distortion factor per phase

-Alarm, pulses and analogue outputs

- RS485 communication port included in all models

- Multi-protocol instrument

- Easy and extremely flexible Set up menu including CT and VT ratios selection

- Password protection for setup and resets

- Model with three phase Harmonic Analysis up to the 25th order and 352 measures

- 3 years warranty period

52 MEASURES

The STAR3 displays 52 main measures.
The model with harmonics shows the harmonics spectrum, adding others 300 parameters

3ph TOT

Neutral

Voltage

Phase-phase voltage

Ö_L1-L2

Ö_L2-L3

Ö_L3-L1

Current

Power factor

Frequency

Current Avg

Current maximum demand

KVAr

kVA

kW Avg

kVAr Avg

kVA Avg

kW maximum demand

1) STAR3
Basic model. It shows all the measures listed in the above table. Includes an RS485 output with multi-protocol capability: Modbus RTU, Modbus IEEE and Modbus ASCII . The importance of the communication and the lower cost of the components allow today the inclusion of the RS485 port as a default features.
Even if you are not interested in making a network of instruments, this possibility will remains always available for future developments.

2) STAR3 ALM:
as the basic model+ two relay outputs. The outputs can be set be for either alarms signalling or pulses or remote relay control .
The function "alarm" can be associated with several measures including V,A,W,THD and harmonics. Each relay has a maximum and a minimum threshold, the histeresys and the delay time. All the settings can be adjusted.
If used in "pulse" mode the relays generate pulses proportional to the associated measures. Also in this case the behaviour is adjustable with the setup menu.
In "remote control" the position of the relay is decided by an external master device ( PLC, PC, etc) through the RS485 line . This is very convenient for load shedding application.

3) STAR3 4-20mA:
as the basic model + two analogue outputs 4-20 mA or 0-20 mA.

4) STAR3 HARMO:
as Star3 ALM+ three phase harmonics spectrum for voltage and current.
In addition to the basic measures of the above table, the harmonics model displays complete information about the spectrum.

For each harmonic order k the following values are available :

Harmonic order k

L1

L2

L3

Vrms_k

Ö

Ö

Ö

Irms_k

Ö

Ö

Ö

The accuracy of the harmonic measures is totally independent from the frequency of the fundamental.
The instrument measures harmonics up to the frequency 1250Hz which is the 25th in case of fundamental at 50Hz. In case of higher frequency value of the fundamental, the numbers of available orders decreases automatically.

OUTPUTS

1) RS485 :
serial communication output included in all models. It is now a standard feature
The STAR3 has an unique feature : allows the selection of three protocols:
Modbus BCD (RTU)
Modbus IEEE
Modbus ASCII (only Vip Energy frame for compatibility with existing softwares)
The full control of the instrument is available only with the BCD and the IEEE format.
The ASCII format is limited to the same data frame of the VIP ENERGY; this allow the connection with all the existing softwares VIPLOAD, VIPVIEW, VIPVISION and the memory module VIPMEM

2) ALM
two digital outputs for alarms, pulses and remote control .
the alarms setup includes the association of the measures, thresholds,
hysteresys % and delay time.
The pulses setup includes association of the measures, number of pulses per unit , pulse width 100 msec or 20 msec

3) 4-20mA
two analogue outputs programmable in two different ranges: 4-20 or 0-20 mA.
The setup includes the association of the measures and the full scale value.

STANDARDS and REGULATIONS CE

The STAR3 conforms to directive IEC 1010-1 430 V for Cat. III and protection level 2 according to IEC 664-664 A. regarding the safety of the operators
It conforms to EN55011 ; EN61000-3-2 ; EN61000-3-3 ; EN61000-4-2 ; EN61000-4-3 ; EN61000-4-4 extension 4kV ; EN61000-4-5 ; EN61000-4-6 ; EN61000-4-8 ;
EN61000-4-11 (EMC)

3-YEARS-WARRANTY

For this instrument we provide a warranty period of 3 YEARS. The high quality level of all our new products makes possible to guarantee the working conditions up to 3 years during which the instruments are immediately replaced with a new unit whenever a factory defect comes out.

ECHNICAL CHARACTERISTICS

Maximum dimensions (mm): instrument: 96 X 96 X 115.4. Cut-out template: 91 X 91

Power supply: from network 230 V or 115 V +15%-20% @ 35÷400 Hz (4 VA).

Display: reverse red LCD with LED backlight

Voltmeter inputs: VL1, VL2, VL3, N up to 430 V phase-neutral, 750 V phase-to-phase, 35÷400 Hz

Voltmeter input impedance: 2 Mohm

Voltage input overload: max 850 V phase-neutral

Current inputs: AL1, AL2, AL3, COM. , consumption 1 VA. Three or two 5A external curr.transf. required

Measuring range : 0-120% In

Sensitivity: current 20 mA ; voltage 10 mV

Overcurrent :withstand 10 amps permanently.

Number of scales: 1 voltage scale, 2 current scales

Measurements: True R.M.S. up to25th harmonic = 1250Hz with fundamental @50 Hz

Sampling frequency: 2.5 kHz.

Accuracy: <0.5% for Voltage and current and Power

Connection: Single phase or three phase star, three phase delta, or diphase systems

Weight : 0.6 Kg

Protection level: instrument IP20, front panel IP40

Temperature range: -10°C ÷ + 50°C

Relative humidity range :(R.H.): from 20% to 90%.

Condensation: non condensing.

The STAR3 displays 52 main measures.The model with harmonics shows the harmonics spectrum, adding others 300 parameters

The STAR3 displays 52 main measures.
The model with harmonics shows the harmonics spectrum, adding others 300 parameters