상품 상세보기 : 일반측정기 - AM6632002 Industrial Circuit Tracing System

The receiver has two detectors in its tip which are tuned to pick up the electromagnetic signals

Designed to handle the majority of tracing applications, the AT-2000 series of Advanced Tracers combine 11 years of experience and three different technologies into one multipurpose instrument. Economically priced, fully portable and easy to use, the AT-2000 series has the following capabilities.

The receiver has two detectors in its tip which are tuned to pick up the electromagnetic signals (“short” mode) or electrostatic signals (“open” mode) generated by the other components. The LED's and sensitivity settings indicate the relative signal strength to allow easy detection of the signal source. The receiver is included.

The load signal generator , when connected to an energized line, will draw a rapidly fluctuating current pulse from the source, causing the power line to emit an electromagnetic signal which is detected by the receiver in the 'short' mode.

These devices allow tracing of line-side conductors without power interruption or interference. The generator accepts 9-600V AC or DC and comes with the AT-2002 and AT-2004.

The transmitter injects a signal into an unenergized conductor. If the conductor is broken (open), no current will flow, so the signal is present as a voltage pulse, which is detected along the conductor's length by the R2000's electrostatic detector ('open' mode). The signal will stop at the open. The transmitter comes with the AT-2004.

When the Inductive Clamp is clamped around an energized line and plugged into the transmitter, it will induce a signal onto the down-stream (load) side to enable identification of equipment on that circuit. The clamp only comes with the AT-2004.

AT-2002

Industrial Circuit Tracing System
Includes the Receiver
Load Signal Generator (9-600V AC/DC)
Cordsets
Adapter and Manual

AT-2004

Industrial Multipurpose Tracing System
Includes the Receiver
Load Signal Generator
Transmitter
Clamp and Cordsets
Adapter and Owners Manual

Applications

Trace conductors buried up to 13 feet
Trace and identify load-side equipment from the circuit breaker while energized
Trace line-side wiring power interruption on circuits from 9 to 600 Volts AC or DC
Trace open wires for over a mile
Trace wire in conduit or, even the conduit itself
Locate ground faults and shorts
Identify individual wires in a bundle
All units are fully fused, protected and intrinsically safe

CAT NO.

MODEL

DEscRIPTION

AVAIL

PRICE

AM6632002

AT-2002

INDUSTRIAL WIRE CIRCUIT TRACING SYSTEM

Yes

1,509,840

AM6632004

AT-2004

INDUSTRIAL MULTI-PURPOSE TRACING SYSTEM

Yes

2,106,000

AM6632005

B2024

OPTIONAL 24V NiCAD BATTERY BOOSTER FOR Wire Circuit Tracing System

Yes

300,132

AM6632006

B2025

OPTIONAL 115V/24VDC BATTERY BOOSTER CHARGER FOR Wire Circuit Tracing System

Yes

88,452