|
|
|
DAVIS 종합 계측기 - 한국대리점 코린스계기(주)
 | |
| The Megger® SCT500 Premise Wiring Tester identifies all common wiring faults, including split pairs |
| The Megger® SCT500 Premise Wiring Tester identifies all common wiring faults, including split pairs; opens and shorts, on both screened (STP) and unscreened (UTP) cabling. Tests are performed in accordance with TIA568A/B, ISO11801, EN50173 and USOC standards. In addition to this, the SCT500 has a built in TDR facility for measuring cable or link length, and, in conjunction with 16 available remote units, can identify various network circuits. |
| |
|
Features |
- Shorts, opens, pair reversal, mis-wires
- Measures cable length
- Works with up to 16 remotes (comes complete with 1 remote)
- Built in tone generator for tracing
- STP and UTP (shielded and unshielded)
- Dual standard (568A and USOC)
- LCD display
- Performs every test required apart from performance testing (performance testing requires very expensive instrumentation)
- Identifies/locates circuits
- Measures cable length
- Also test patch leads
- 3 Year Warranty
|
| | | SPECIFICATIONS
|
The following cable and wiring standards are supported by the MG8448 |
| UTP TIA568A/B; STP TIA568A/B; UTP USOC; STP USOC |
| The following fault states are identified and indicated on the MG8448 display |
| Open Pin x (y) (z) |
Open circuit connection at the indicated pin(s) |
| Short Pin x y |
Short circuit between the indicated pins |
| Crossed Wires Pin x y |
The indicated wires have been reversed |
| Split Pair x y |
The two wires indicated are not paired correctly |
| Multiple Fault Pins w x y z |
There are several faults existing |
| Short Pin x Scr |
The indicated pin is shorted to the screen (STP only) |
| Open Screen |
The cable screen is open circuit (STP only) |
| Missing Remote Unit |
No remote unit was detected at the far end on th cable |
| Correct wiring or wire map leads to the following indication on the MG8448 display |
| PASS I/D xx |
Test has passed with remote identifier xx at the far end; 16 unique remote identifiers are available |
| The following functions/screen displays also exist within the MG8448 |
| Length xx.xm |
The cable being tested is xx.xm long |
| Range |
6 ft - 360 ft; Accuracy 6 ft - 30 ft (±1.5 ft); 30 ft - 360 ft (±5%) |
| Warble Mode |
The tester will output a warble tone for cable tracing |
| Frequency alternation |
810Hz and 170Hz |
| Rate of alternation |
6 times per second |
| Low Battery |
The instrument battery needs replacement |
| CAT NO. |
 |
MODEL |
|
DEscRIPTION |
|
AVAIL |
|
PRICE |
| MG8448 |
|
SCT500 |
|
Advanced Premise/Structured Cabling Tester |
|
Yes |
|
745,200 | | |
|
|
 | |
 |
|
 |
|
이 상품에 대한 사용후기가 아직 없습니다.
사용후기를 작성해 주시면 다른 분들께 많은 도움이 됩니다. |
|
 |
|
 |
|
|
 | |
|
|
|
|
이 상품에 대한 질문이 아직 없습니다.
궁금하신 사항은 이곳에 질문하여 주십시오. |
|
|
|
|
|
|
|
DAVIS 종합 계측기 - 한국대리점 코린스계기(주)
|
|
현재위치 : 
