 | |
| The award-winning NEWPORT® I™Server is the simplest, easiest, most economical way |
The award-winning NEWPORT® I™Server is the simplest, easiest, most economical way to connect serial devices to an Ethernet network and the Internet.
Getting started with the iServer is very simple and easy because it can take a dynamically assigned IP address from a DHCP server on your network. This DHCP client capability is a valuable and unique feature of the NEWPORT iServer that makes it extremely easy and simple to start using this device on almost any Ethernet network.
You can easily assign a static IP address to the iServer instead of a dynamic one, if necessary. The IP address can be assigned locally through its serial connection, as well as remotely over an Ethernet network via Telnet or a web browser, using its factory default IP address.
The NEWPORT iServer connects to an Ethernet Network with a standard RJ45 connector. Serial devices connect to screw terminals on removable connectors. You can select RS-232, or RS-485 (and RS-422) Serial Communications from the configuration Web page.
The iServer can be used to make an existing Serial device a "node" on an Ethernet network with a unique IP address that's accessible from any authorized computer on the LAN, WAN, or Internet.
The iServer can instead be used to create a virtual tunnel on an Ethernet/Internet network simulating a local point-to-point serial connection between a serial device and a PC. This replaces dedicated point-to-point wiring limited to 50 feet on an RS-232 connection.
The NEWPORT iServer packages the Serial data in standard TCP/IP packets that can travel anywhere on the Ethernet LAN or over the Internet.
The NEWPORT iServer is compatible with almost any device with a Serial interface such as: time clocks, security alarms, card-key access controllers, telecommunications equipment, vending machines, bar code readers, electric power meters, UPS systems, test & measurement instrumentation, PLC’s, serial printers, cash registers, and many more.
You do not need to rewrite the firmware for your serial devices to work with the iServer, and in some cases might not need to change your application software. Your serial devices will function over the Ethernet network or the Internet as if they were connected directly to a PC. The COM port on the iServer simulates a local COM port on the PC.
The NEWPORT iServer is compatible with wireless Ethernet. In settings where wires of any kind are not possible, the NP3013 can be connected to a Wireless Ethernet Access Point enabling simple, economical Wireless connectivity of Serial Devices. |
| |
|
Features |
- Connect almost any Serial Device to an Ethernet network and the Internet
- Replace dedicated wiring and PC’s for serial connections
- Handles RS-232, RS-422 and RS-485 Serial Communications
- Digital input/output lines
- Well-developed TCP/IP Stack
- Web based interface for easy configuration and access without any special software
- Configuration option via Telnet and Serial
- DHCP and DNS support for dynamic IP address assignment
- Password protection for Security
- Snaps easily into DIN Rail mounting rack
- Firmware upgradeable
|
| | | SPECIFICATIONS
| Serial Interface |
| Interface |
Software Selectable RS-232, RS-422 or RS-485 (2 wire) |
| Connector |
screw terminal plugs (EIS-2) RJ45 (EIS-2-RJ) |
| Data Rates |
300 to 115.2 Kbps |
| Characters |
7 or 8 data bits |
| Parity |
odd, even, or none |
Stop Bits
Flow Control
Digital I/O's |
1 or 2
Hardware (RTS/CTS) and Software (Xon/Xoff).
The hardware flow control is available only with the EIS-2-RJ model
4 digital input/output lines |
| Network Interface |
| Interface |
Ethernet 10Base-T |
| Connector |
RJ45 |
| Protocols |
TCP/IP, ARP, ICMP, DHCP, DNS, HTTP, and Telnet |
| Indicators (LED's) |
Network Activity, Network Link, and Serial Transmit/Receive |
| Processor |
| CPU |
Enhanced 8051, 22 MHz |
| Memory |
512 Kbyte Flash, 16 Kbyte SRAM |
| Management |
Embedded Web server, Telnet login, Serial login |
| Embedded Web Server |
Serves dynamic Web pages and Java applets (256 Kbyte capacity) |
| Power Input - DIN Rail Enclosure (DC Power supply sold separately) |
| Input: |
10-32 Vdc |
| Consumption |
2 W max. |
| Environmental |
| Operating Temperature |
0 to 70° (32 to 158°F) |
| Storage Temperature |
-40 to 125°C (-40 to 257°F) |
| Material |
Polycarbonate case with DIN Rail mount |
| Dimensions |
90.2H x 25.1W x 115.0D mm (3.54 x .99 x 4.53 in) |
| Weight |
113 kg (0.25 lbs.) |
| Agency Approvals |
FCC-B, C/UL, CE |
| CAT NO. |
 |
MODEL |
|
DEscRIPTION |
|
AVAIL |
|
PRICE |
| NP30013 |
|
EIS-2 |
|
iServer Industrial MicroServer™ with screw termianl serial port |
|
Yes |
|
421,200 |
| NP30014 |
|
EIS-2-RJ |
|
iServer Industrial MicroServer™ with RJ45 serial port |
|
Yes |
|
421,200 |
| NP30015 |
|
IBRN-PS-1000 |
|
Power Supply (switching) 95 to 240 Vac input, 24 Vdc output @ 850mA (power up to 7 units) |
|
Yes |
|
324,000 |
| |
|
|
 | |
 |
|
 |
|
이 상품에 대한 사용후기가 아직 없습니다.
사용후기를 작성해 주시면 다른 분들께 많은 도움이 됩니다. |
|
 |
|
 |
|
|
 | |
|
|
|
|
이 상품에 대한 질문이 아직 없습니다.
궁금하신 사항은 이곳에 질문하여 주십시오. |
|
|
|
|
|
|
|
현재위치 : 
