 | |
| These Ethernet-enabled data acquisition and control modules, feature I/O, data acquisition |
These Ethernet-enabled data acquisition and control modules, feature I/O, data acquisition and networking in one module to build a cost-effective, distributed, monitoring, and control solutions for a wide variety of industries and applications. Through standard Ethernet networking, the module retrieves I/O values from sensors and publishes these real-time values to networked nodes on the local area network, intranet, or Internet.
With Ethernet-enabled technology, the modules make up a cost-effective distributed data acquisition and control system for building automation, environmental monitoring, facility management and e-manufacturing applications. |
| |
|
Features |
- Ethernet-based smart I/O
- Mixed Analog and Digital I/O in a single module
- Built-In HTTP server and web page in each module for Data Monitoring
- Active Alarm/Event handling
- Industrial Modbus/TCP Protocol
- Remote F/W upgrade thru Internet
- Pre-built smart functions
|
| |
|
Applications |
- Environmental Monitoring
- Facility Management
- Building Automation
- Machine Automation
- Factory Automation
|
| | | SPECIFICATIONS
| 10/100 BaseT Ethernet Network |
Based on the highest speed industrial network available |
| Analog Input Modules |
Use microprocessor-controlled, high-resolution, 16-bit, sigma-delta A/D converters to acquire sensor signals such as voltage, current, thermocouple or RTD. |
| Programmable Alarm Output |
Analog input modules include high and low alarm signal with remotely configurable limit values.. |
| Independent Channel Input Type Configuration |
Either PT-100, Pt-1000 or Balco mA for each channel |
| Eight-channel 16-bit Analog Input Modules |
| Digital Input and Output Modules |
Twelve isolated digital input channels and six isolated digital output channels. |
Digital Input Channels
ProvideThree Operation Modes |
Normal Digital Input with inverter setting, 1KHz counter with digital filter, Hi-to-Lo, Lo-to-Hi Latch |
| Digital Output Channels Provide Three Operation Modes |
Normal Digital Output, Pulse output with continuous or burst count mode, Hi-to-Lo, Lo-to-Hi Delay |
| Counter/Frequency |
| AN6051 |
Two 32-bit counter channels and a built-in programmable timer for frequency measurement. |
| Programmable Alarm Output |
| AN6051 Modules |
Include two digital output channels for alarm functions. You can set alarm values (32-bit) into the module from your host computer. |
| Relay Output Modules offer six isolated digital input channels and six isolated relay channels |
| Ethernet Hub/Switch/Fiber Optic |
10 Mbps hub, with four twisted pair ports; a 5-port 10/100 Mbps switch; one fiber optic and four RJ-45 ports. |
| Power Input Range |
+10 ~ 30 V DC |
| Surge Protection |
3000 V DC |
| Operating Temperature |
-10 ~ 70° C |
| CAT NO. |
 |
MODEL |
|
DEscRIPTION |
|
AVAIL |
|
PRICE |
| AN6017 |
|
ADAM-6017 |
|
8-channel Analog Input w/DO Module |
|
Yes |
|
810,000 |
| AN6050 |
|
ADAM-6050 |
|
18-channel Isolated Digital I/O Module |
|
Yes |
|
421,200 |
| AN6051 |
|
ADAM-6051 |
|
16-channel Isolated DI/O w/Counter Module |
|
Yes |
|
421,200 |
| AN6060 |
|
ADAM-6060 |
|
6-Channel Relay Output w/DI Module |
|
Yes |
|
421,200 |
| AN6510 |
|
ADAM-6510 |
|
4-port Industrial 10Mbps Ethernet hub |
|
Yes |
|
205,200 |
| AN6520 |
|
ADAM-6520 |
|
5-port Industrial 10/100Mbps Ethernet Switch |
|
Yes |
|
378,000 |
| AN6700 |
|
ADAM-6700 |
|
5-port Industrial 10/100M Ethernet Switch w/Fiber |
|
Yes |
|
639,360 | | |
|
|
 | |
 |
|
 |
|
이 상품에 대한 사용후기가 아직 없습니다.
사용후기를 작성해 주시면 다른 분들께 많은 도움이 됩니다. |
|
 |
|
 |
|
|
 | |
|
|
|
|
이 상품에 대한 질문이 아직 없습니다.
궁금하신 사항은 이곳에 질문하여 주십시오. |
|
|
|
|
|
|
|
현재위치 : 
