자동로그인
 

  오늘 : 1,043명 
  어제 : 1,292명 
  그제 : 1,053명 
  최대 : 3,614명 
  전체 : 4,451,009명 
현재위치 : Home > 온도/압력/습도/전기 교정기 > Druck 압력 교정기

DPI 610/615 휴대용 압력 교정기
    · 고객선호도 :
    · 시중가격 :
    · 판매가격 :
    · 포 인 트 :
    · 수 량 :

회원가입을 하시면 할인된가격을 보실수 있습니다.
모든가격은부가세별도 입니다.
회원이 되시면 가격변동정보, 신제품, 특판제품, 기술정보등 다양한
뉴스정보를 보내드립니다.
30만원미만은 택배비 3,000원(착불)입니다.
카드결재시 세금계산서 발행 불가합니다.
배송은 평균 2~3일정도 예상됩니다.
                    (0)                     (0)                     (0)
DPI610 압력교정기 (표준 악세사리 포함: 압력/진공 펌프, Volume adjuster, Vent valve, 이동용 케이스, 충전 베터리 및 충전기, 25 개의 단위 선택 가능, Calibration certificate, 사용설명서, 전기 테스트용 leads) 5psi/30psi/100psi/300psi 중 선택: 4,300,000원, DPI610 고압 압력교정기 3000psi/5000psi/6000psi 중 선택: 6,000,000원, DPI615 Documenting 압력 교정기 5psi/30psi/100psi/300psi 중 선택: 5,300,000원, DPI615 Documenting 고압 압력교정기 3000psi/5000psi/6000psi 중 선택: 7,300,000원, 외장 압력 센서 1psi/5psi/10psi/30psi/100psi/300psi/500psi: 1,300,000원, 외장 압력 센서 1000psi/2000psi/5000psi/10000psi 중 선택: 1,620,000원, 외장 차압 센서 1psi: 2,000,000원, 외장 차압 센서5psi : 1,620,000원, 저압 외장 센서: 1 ~ 60in. H2O 범위 주문 가능: 2,000,000원, 악세사리: Mating Cable : 143,000원, Dirt Moisture Trap : 300,000원, "Intecal for Industry" 소프트웨어 : 1,200,000원, Spare Carrying Case : 83,000원,

GE Druck DPI 610/615

Portable pressure calibrators


 
GE Druck DPI 610/615
 
Druck DPI 610 and DPI 615 portable pressure calibrators combine practical design with state-of-the-art performance. These self-contained, battery-powered packages contain a pressure generator, fine pressure control, device energizing (not IS version), and output measurement capabilities as well as facilities for 4-20mA loop testing and data storage.

In addition, the Druck DPI 610 and DPI 615 have rugged weatherproof designs, which are styled such that the pressure pump can be operated and test leads connected without compromising the visibility of the large dual parameter display. These Druck pressure calibrators' mA step and ramp outputs and built-in continuity testers extend the capabilities to include the commissioning and maintenance of control loops.

Featuring highly reliable pneumatic and hydraulic assemblies and self-test routines, the Druck DPI 610/615 Series of pressure calibrators can be relied upon time and time again for field calibration in the most extreme conditions. The key to simple operation is the Task Menu. Specific operating modes such as P-I, switch test, and leak test are configured at the touch of a button by menu selection.

Druck DPI 615 Portable Documenting Pressure Calibrator

The Druck DPI 615 pressure calibrator adds powerful time saving and error eliminating features to the comprehensive functionality of the Druck DPI 610. These features include field error calculations with PASS/FAIL analysis and two way PC communications for downloading procedures and uploading results.

Pressure calibrators from the Druck DPI 615 series calculate errors and report the pass/fail status during field tests. Problems and failures can be analyzed graphically for immediate assessment and correction or, at a more convenient time and location, by recalling the information from the DPI 615’s memory. This simple-to-use feature reduces calibration and maintenance times and eliminates human errors.

When used in conjunction with calibration management software, the Druck DPI 615 pressure calibrator greatly reduces the financial and resource burden imposed by quality systems such as ISO 9000. As work orders are issued, object lists and procedures are downloaded to the DPI 615. In the field, these procedures configure the pressure calibrator for the tests. The errors and pass/fail status are reported and recorded in memory (as found or as left results) for later upload to the software. Calibration certificates can then be printed and plant maintenance systems updated. The whole documenting process is completed in a fraction of the time it takes using manual systems and without human error.

Pneumatic, Hydraulic, and Indicating Versions Available

The GE Druck DPI 610/615 pressure calibrator is available as a pneumatic calibrator with pressure ranges from -22 inHg to 300 psi with an internal pump that generates both pressure and vacuum. The pneumatic calibrator is compatible with most common gases. The hydraulic calibrator generates pressures up to 6000 psi via an internal screw pump and can read up to 10,000 psi from an external source. It is compatible with demineralized water and most hydraulic oils. An indicator-only model with pressure ranges up to 5000 psi is also available, featuring an internal transducer but has no electrical inputs or outputs.

The standard instrument package includes carrying case, rechargeable battery pack with charger, calibration certificate, manual, electrical leads, and other required components such as pump, volume adjuster, and vent valve (depending upon calibrator model).

번호 제목 작성자 작성일 평가점수
이 상품에 대한 사용후기가 아직 없습니다.
사용후기를 작성해 주시면 다른 분들께 많은 도움이 됩니다.
 
* 이 상품을 사용해 보셨다면 사용후기를 써 주십시오.
번호 제목 작성자 작성일 답변
3 DPI 610(Druck, 0~300psig) 견적문의입니다. 김종우 20-04-13 13:55
 
2 DPI610PC 견적요청합니다. 김순귀 11-08-29 15:11
 
1 DPI 610PC/615PC 김승배 10-07-02 12:10
 
* 이 상품에 대한 궁금한 사항이 있으신 분은 질문해 주십시오.
이 상품과 관련된 상품이 없습니다.
 
회사소개 | 서비스이용약관 | 개인정보취급방침
경기도 성남시 중원구 상대원동 513-15번지 선텍시티B/D 708호
대표 전화 : 031-777-1588 / 팩스 : 031-777-1587 / 개인정보관리책임자 : 관리자
사업자 등록번호 : 116-81-31753 / 통신판매업신고 성남시 제2005-886호
대표 : 홍영화 / 운영자 : 윤상미
Copyright ⓒ 2002 상호 : (주)코린스. All Rights Reserved.
가입사실확인